What is actually on sale near 400 W
These are the panels under 400 W we can see quoted today, with the rate our dealers gave us. The table updates from the same daily feed as the rest of the site.
| Panel | Rate | Per panel |
|---|---|---|
| Jesko · 240 W | Rs 31.25 /W | 7,500 PKR |
| MaxPower · 360 W | Rs 21.60 /W | 7,798 PKR |
| Jesko · 380 W | Rs 23.00 /W | 8,993 PKR |
And these are the six cheapest of the smallest modern modules — 585 W, the size most new rooftop systems in Pakistan are actually built from. The full table carries the rest:
| Panel | Rate | Per panel |
|---|---|---|
| Turkish · 585 W | Rs 37.75 /W | 22,537 PKR |
| Jesko · 585 W | Rs 38.75 /W | 22,863 PKR |
| OSDA · 585 W | Rs 38.75 /W | 22,669 PKR |
| NPT · 585 W | Rs 39.00 /W | 22,815 PKR |
| Luxen · 585 W | Rs 39.00 /W | 22,815 PKR |
| Seraphim · 585 W | Rs 39.25 /W | 22,961 PKR |
Why 400 W panels have disappeared from the market
A 400 W panel and a 585 W panel take almost the same labour to mount, wire and clamp. The larger module needs fewer rails, fewer clamps, fewer connectors and fewer roof penetrations for the same system size, so installers and importers both prefer it. Manufacturers moved their volume lines to 540 W and upward over the past few years, and Pakistani importers followed. The 400 W to 500 W sizes that were standard a few years ago are now mostly leftover stock rather than current production.
That is why a search for a 400 W price returns so little useful information: it is not a size the local market is restocking.
The per-watt figures are not what you would expect
Normally a smaller panel costs more per watt, not less. In our current feed the opposite is true: the panels under 400 W are quoted well below the 585 W modules on a per-watt basis. Against a median of Rs 39.75 per watt across the 42 brands we track, the small panels sit far underneath.
We report the rates as dealers give them to us, and we are not going to invent an explanation. But a rate that far below the market usually means older stock — earlier cell technology, lower efficiency, and less of the performance warranty left to run. Before buying on per-watt price alone, work the whole system through:
- A 5 kW array from 380 W panels needs about 14 modules; from 585 W panels, about 9. That is five more sets of rails, clamps and connectors, and noticeably more roof area.
- Lower-efficiency panels need more square metres for the same output, which matters on a small Pakistani rooftop more than the per-watt figure does.
- Ask the manufacture date. A warranty is counted from the panel leaving the factory, not from the day you buy it.
If a dealer offers you a “400 W” panel
- Confirm the exact model number and the rated wattage on the panel label.
- Ask whether it is new stock or clearance, and get the answer written on the invoice.
- Check the panel carries IEC certification if you intend to apply for net metering.
- Ask who honours the warranty — the manufacturer or the dealer — and get that in writing.
What to compare instead
If your system is still at the planning stage, compare on the sizes the market is actually selling. Our daily price table carries every brand and model we track with its current rate and stock status, and the sizing guide works through how many panels a given system size needs.
Prices here come from dealers we contact directly, and they move. The figures on this page are pulled from that feed when the page loads, so they are current rather than typed in once and left.