Solar panel prices in Pakistan have stayed soft through the first half of August 2026, keeping this one of the cheapest windows in recent memory to switch to solar. Here’s where rates sit this week, what’s driving them, and how to read the numbers before you buy.
For the exact figure on any given day, always check our live, daily-updated solar panel prices in Pakistan table — the ranges below are a snapshot for mid-August 2026.
Where solar panel prices in Pakistan sit this week
As of mid-August 2026, A-grade Tier-1 N-type panels are trading in the Rs 38–44 per watt range, depending on brand, wattage and your city. To put that in rupee terms per panel:
- A typical 585W N-type panel works out to roughly Rs 22,000–26,000.
- Premium brands (Longi, Jinko, Canadian, JA Solar) sit toward the top of the per-watt range — around Rs 41–44 per watt.
- Value brands (and P-type stock) sit lower, from around Rs 37–39 per watt.
Prices vary by dealer margin, documentation, delivery and stock, so treat these as market ranges rather than a single fixed rate.
Why prices have stayed low
Two forces are pulling in opposite directions, and low global supply is winning:
- Falling global module prices. Most Tier-1 N-type brands have dropped roughly Rs 2–4 per watt compared with two months earlier, as international oversupply keeps landed costs down.
- The 10% import tax (a partial offset). Since 1 July 2025, imported solar panels carry a 10% sales tax under the Finance Act 2025-26 — the government originally proposed 18% and settled at 10% after parliamentary pushback. That tax is already baked into today’s shelf prices, so it isn’t a surprise cost at purchase; it simply means prices didn’t fall as far as the raw global drop would suggest.
Net effect: even with the tax priced in, panels remain cheap by historical standards.
N-type vs P-type — what you’re paying for
Most of the market has now moved to N-type panels, and it’s worth understanding the premium:
- N-type panels offer higher efficiency, better performance in heat (useful in Pakistan’s summers), slower degradation and longer warranties — which is why they command the top of the price range.
- P-type stock is cheaper per watt but is being phased out; think carefully before buying it just to save a couple of rupees per watt on a 20-year asset.
For most buyers, a Tier-1 N-type panel at Rs 40-ish per watt is the sweet spot of price and long-term value.
How to buy well at these prices
- Compare on price-per-watt, not sticker price. A 585W panel that looks pricier can be cheaper per watt than a smaller one.
- Confirm the panel is A-grade, Tier-1 and N-type, with a genuine warranty — the cheapest quotes often cut here.
- Factor in the balance of system — inverter, mounting, wiring, and increasingly a battery (see our note on why storage now matters more under the new net billing rules).
- Lock your quote. Rates move daily; a written quote protects you against a mid-purchase change.
Bottom line
Mid-August 2026 remains a buyer’s market: Tier-1 N-type panels around Rs 38–44 per watt, prices down a couple of rupees on two months ago, and the 10% import tax already included in the numbers you see. Check the daily price table for the exact figure on the day you buy, and compare on per-watt value rather than headline price.
Price ranges reflect market rates and our own daily-updated data for mid-August 2026, cross-checked against multiple Pakistani solar market trackers. Actual prices vary by dealer, city and specification. Sources on the import tax: pv magazine; Arab News — GST reduced from 18% to 10%.
Sources & references
Tariff, net-metering, and policy details on this page draw on the following official sources. Rates change often, so confirm current figures with the relevant authority or a licensed installer before you decide.
- NEPRA — National Electric Power Regulatory Authority: electricity tariffs and the 2026 shift from net metering to net billing.
- AEDB — Alternative Energy Development Board: solar policy, installer standards, and net-metering guidance.
- Your local distribution company (DISCO) — for example LESCO, K-Electric, IESCO, MEPCO, PESCO or QESCO — for area-specific tariffs and the net-metering application process.



